How Many OPC UA Data Points Per Thread Prevent Data Freezing?
How many OPC UA data points can be handled in a single thread before data freezing becomes a risk, and how does OPC Expert address this? There is no universal [...]
How many OPC UA data points can be handled in a single thread before data freezing becomes a risk, and how does OPC Expert address this? There is no universal [...]
Question: How do you configure OPC redundancy failover in OPC Expert when the OPC server does not provide a heartbeat signal? When an OPC server does not provide a dedicated [...]
Question: Does OPC Expert need to be installed on both machines involved in a bridge or tunnel connection, or only on one? OPC Expert does not require installation at all, [...]
What causes recurring OPC data freezing, and how can it be permanently resolved rather than just temporarily restarted? Recurring OPC data freezing is most commonly caused by one of three [...]
Is OPC Expert compatible with OPC servers from different vendors, or does it require matching vendor software on both sides of a connection? OPC Expert is compatible with OPC servers [...]
Can OPC Bridge facilitate data exchange between a PLC and a SCADA platform like Wonderware or TopServer, and how does that work in practice? OPC Bridge can facilitate data exchange [...]
Does OPC Bridge in OPC Expert support hot standby redundancy so that data transfer continues automatically if the primary server fails? Yes, OPC Expert supports hot standby redundancy as part [...]
When connecting OPC DA and OPC UA systems, when should you use OPC Bridge versus OPC Tunneler in OPC Expert? OPC Bridge and OPC Tunneler are both available within OPC [...]
When using OPC Expert to bridge an OPC UA client to an OPC DA server, does it run on the client machine or the server machine? OPC Expert can run [...]
What security risks arise when bridging two remotely located OPC servers, and how does OPC Expert address them? Bridging OPC servers across remote network segments introduces several security considerations that [...]